Home > TOGGLE CLAMPS > Vertical toggle clamps > No. 6802Y Vertical acting toggle clamp, yellow handle


Vertical acting toggle clamp with yellow handle

with open clamping arm and vertical base.
Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated.
Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection, lock washer for the thrust bolt at the end of the clamping arm.
Complete with tempered, galvanized clamping screw no. 6890

Order
no.
Size F1
[kN]
F2
[kN]
Clamping screw Weight
[g]
557018 1 0.6 1.1 M 5x 30 105
557019 2 0.8 1.2 M 6x 35 175
557020 3 1.2 2.5 M 8x 45 410
557021 4 1.7 3.0 M 8x 65 630
557022 5 3.0 5.0 M12x 80 1480
557023 6 3.4 5.5 M12x110 2200

Also available in matte-black version (no. 6802B)!

Dimensions:
Order
no.
Size A B C D E F H H1 HW min. HW max. I K L L1 L2 M M1 N O P α α*
557018 1 5 39 16.0 4.5 18 6 29 109.0 6.0 12.5 10 5.5 - 61 59 23.5-25.0 - 19 5 27 95° -
557019 2 6 52 20.0 5.5 25 11 38 144.5 11.5 19.5 12 6.0 12.5 78 80 28.5-32.0 30 21 5 32 105° 60°
557020 3 8 79 20.0 7.5 36 19 48 200 16.5 25.0 18 7.5 - 112 114 41.0 - 27 6 40 105° 60°
557021 4 10 101 32.0 8.6 54 16 65 244 16.5 45.5 20 13.0 - 141 130 55.5 - 35 8 53 105° 60°
557022 5 14 140 45.0 8.5 72 35 77 301 18.0 49.0 25 9.5 26.5-31.5 195 183 66.0 64 45 10 65 115° 60°
557023 6 14 165 50.5 13.0 89 28 117 369 33.0 90.5 30 24.5 - 231 206 102.0 - 45 10 90 140° 60°
* The opening angle can be changed by pressing in a stop pin.