Home > TOGGLE CLAMPS > Vertical toggle clamps > No. 6800G Vertical acting toggle clamp, green handle

Vertical acting toggle clamp with green handle

with open clamping arm and horizontal base.
Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 to 6, run in hardened bushings. Bearings are pre-lubricated.
Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection, lock washer for the thrust bolt at the end of the clamping arm.
Complete with tempered, galvanized clamping screw no. 6890

Order no. Size F1
[kN]
F2
[kN]
Clamping screw Weight
[g]
557465 0 0.5 0.7 M 4x 25 60
557466 1 0.6 1.1 M 5x 30 105
557467 2 0.8 1.2 M 6x 35 175
557468 3 1.2 2.5 M 8x 45 410
557469 4 1.7 3.0 M 8x 65 630
557470 5 3.0 5.0 M12x 80 1480
557471 6 3.4 5.5 M12x110 2200


Dimensions:


Order
no.
Size
A
B
C
D
E
F
H
H1
HW min.
HW max.
I
K
L
L1
L2
M
M1
N
P
α
α*
557465 0 4 31.0 8.5-13.5 4.5 14 5.5 18.0 81.0 -1.5 3.5 8 5.5 - 49 50 23.0 - 32 22 95° -
557466 1 5 39.0 16.0 4.5 18 6.0 19.0 98.5 -4.0 2.0 10 5.5 - 61 59 22.5-26.0 - 35 27 95° -
557467 2 6 52.0 20.0 5.5 25 11.0 23.0 139.5 -3.0 4.5 12 6.0 12.5 78 89 23.0-31.0 27 43 32 105° 60°
557468 3 8 79.0 20.0 7.5 37 19.0 33.0 186.0 2.0 11.0 18 7.5 - 112 112 32.5 - 46 35 105° 60°
557469 4 10 101.0 32.0 8.6 54 16.0 42.5 221.0 -6.0 22.5 20 13.0 - 141 130 43.5-46.5 - 64 53 105° 60°
557470 5 14 140.0 45.0 8.5 73 34.0 55.8 281.0 -3.0 27.5 25 9.5 26.5-31.5 195 185 45.0-50.0 45 70 65 115° 60°
557471 6 14 165.5 50.5 13.0 89 28.0 81.0 333.0 -2.5 55.0 30 24.5 - 231 206 67.5-72.5 - 100 90 140° 60°
* The opening angle can be changed by pressing in a stop pin.
Also available in "STAINLESS STEEL" version (no. 6800NI) and in matte-black version (no. 6800B)