Home > STANDARD CLAMPING ELEMENTS > Setting Elements > No. 6465 Precision wedge block
Order
no.
Size H min. H max. H/U*
[mm]
F max.
[kN]
SW
[mm]
Weight
[Kg]
375592 55 50 55 0.71 40 22 2,8
375618 85 77 85 0.71 250 36 11.5

*H/U= height adjustment per single turn.

Dimensions:
Order
no.
B1 B2 G H1 H2 H3 H4 L L1 L2
375592 60 80 20 60-65 47,5 10 13 128 150-179 60
375618 100 140 30 87-95 74,0 20 15 210 242-287 81

Application:
- The fine-machined wedge surfaces permits a smooth, precise adjustment to less than 1/10 mm.
- Operation can be via an open-ended spanner
- hence ensuring enhanced safety and ease of handling due to the large adjusting forces.
- The double wedge effect produces a precise vertical movement with no lateral slide.
- The flat design of the precision height wedge enables higher safety properties to be realized when aligning heavy and large components.
- The precision whip stock has an additional centering hole in the floor of the base surface. (suitable for a pin ISO 8734 - 12 mm diameter)

Note:
- Suitable caps for the precision whip stock are nos. 6440, 6441 and 6442
- Precision whip stock can be adjusted under load
- Height adjustment is 0.71 mm / revolution