Home > STANDARD CLAMPING ELEMENTS > Vacuum clamping technology
Choose a sub category:
No. 7800 Vacuum clamping plate No. 7800AMG Adapter mat, rubber
No. 7800APA Adapter mat, aluminum No. 7810AB Surface-mounted block
No. 7810APA Adapter plate, aluminum No. 7810AMG Adapter mat, rubber
No. 7800VPX Rotary vane vacuum pump No. 7800VPF Liquid separator
No. 7800D Seal cord No. 7800VPE Vacuum pump, external
No. 7800V Vacuum meter No. 7800VD Sealing ring
No. 7800VDS Vacuum pressure sensor with accessories No. 7800E Eccentric stop, dia. 30 mm
No. 7800VSD Sound absorber No. 908-G1/8 Screw plug
No. 7800VAF Suction filter No. 7800AV Ball-Valve
No. 7800VNS Plug-in nipple for quick coupling No. 7800ZS ISO 8734-4x12-A cylinder pin
No. 2800W-06 Pneumatic hose No. 7800VAB Locating pin
No. 7800VSB Sword pin No. 6325 Clamps for machine vices
No. 6370ZN-20 Clamping nipple for clamping modules K20 No. 6370ZNS-001 Engagement nipple screw
No. 7800 Vacuum clamping plate No. 7800AMG Adapter mat, rubber
Included in scope of supply:
- Base plate made of aluminum
- Integrated Venturi nozzle
- Sound absorber, supplied
- Vacuum meter
- Shut-off valve
- 6 eccentric stops
- 2 m pneumatic hose
- Plug-in nipple for compressed air connection
- 10 m sealing cord Ø 4 mm

Adapter mat, rubber
No. 7800APA Adapter mat, aluminum No. 7810AB Surface-mounted block
Adapter plate, aluminum
The following are supplied as standard:
- Surface-mounted block from aluminum, grid 12.5 x 12.5 mm
- 3 eccentric stops with fixing screws
- 1 m sealing cord Ø 2.0 mm
No. 7810APA Adapter plate, aluminum No. 7810AMG Adapter mat, rubber
Suitable for surface-mounted block no. 7810AB.
Suitable for surface-mounted block no. 7810AB.
No. 7800VPX Rotary vane vacuum pump No. 7800VPF Liquid separator
Included in scope of supply:
- suction-side fine-mesh filter
- oil mist separator
- reversing valve for coarse or fine vacuum operation
- anti-vibration buffer
- initial oil fill
- without gas ballast
included in scope of supply:
- Water separator
- Vacuum filter
- Fastening unit
- Ball valve
- Coupling plug 1/2“ external thread - 15 mm
- Plastic tube Ø 15 x 12 mm, length 2 m
- Coupler socket
- Double nipple
No. 7800D Seal cord No. 7800VPE Vacuum pump, external
Shore hardness: 8-13°.
Vacuum pump, external
No. 7800V Vacuum meter No. 7800VD Sealing ring

Vacuum meter

for vacuum meter
No. 7800VDS Vacuum pressure sensor with accessories No. 7800E Eccentric stop, dia. 30 mm
Electrical connection:
Cable with connector according to EN 60947-5-2, round design M 8x1, 4-pin, Cable length 0.3 m.
Scope of supply consists of:
- Pressure sensor
- Vacuum hose, outer Ø 4 mm, length 30 cm
- Plug connection G1/8-4
Steel, blued.
Complete with flat-head screw.
No. 7800VSD Sound absorber No. 908-G1/8 Screw plug
Housing and absorber insert of PE.
with rubber seal
No. 7800VAF Suction filter No. 7800AV Ball-Valve
Housing of brass, filter insert of tin bronze.
manually operated.
No. 7800VNS Plug-in nipple for quick coupling No. 7800ZS ISO 8734-4x12-A cylinder pin
with cap nut DN7.2. Brass.
Steel.
No. 2800W-06 Pneumatic hose No. 7800VAB Locating pin
Pneumatic hose
Steel.
No. 7800VSB Sword pin No. 6325 Clamps for machine vices
Steel.
Tempering steel, blued, packaged in pairs.
No. 6370ZN-20 Clamping nipple for clamping modules K20 No. 6370ZNS-001 Engagement nipple screw
Hardened, for hydraulic and pneumatic clamping modules size K20.
Strength class 10.9.
Suitable for clamping nipple, article no. 6370ZN.