Home > STANDARD CLAMPING ELEMENTS > Stops and precision T-nuts
Choose a sub category:
No. 6350 Parallel stops in pairs No. 6328 Cylindrical stop
No. 6351 Parallel stop, single No. 6351 Parallel stop, in pairs
No. 6353 Precision angle stop No. 6355V Prismatic clamping block, single
No. 6355V Prismatic clamping block, pair No. 6357 Stop
No. 6358 Side stop DIN 6323 Loose type tenons
No. 6322A Fixed type tenons No. 6322B Low type tenons
No. 6350 Parallel stops in pairs No. 6328 Cylindrical stop
For machine grooves.
Can also be used as parallel washers.
Plain parallel in height, fine-ground, in pairs.
Case-hardened.

Pair tolerance tp at height IT 5.
Rated dimensional tolerance in height ISO 2768m.
Rated dimensional tolerance in width h7.
Remaining dimensions to DIN ISO 2768m.
case hardened and ground. The short version, ground to ±0.01 mm tolerance in height can be used as support.
No. 6351 Parallel stop, single No. 6351 Parallel stop, in pairs
case hardened and ground. Parallelism within 0.02 mm, matched tolerance 0.02 mm. Nominal tolerance DIN 7168 medium.
case hardened and ground. Parallelism within 0.02 mm, matched tolerance 0.02 mm. Nominal tolerance DIN 7168 medium.
No. 6353 Precision angle stop No. 6355V Prismatic clamping block, single
case hardened and ground.
Setting: parallel and at angles of 30, 45, 60 and 90° related to T-slots. Guaranteed precision for all faces according to slots ±30".
case hardened and ground.
No. 6355V Prismatic clamping block, pair No. 6357 Stop
case hardened and ground.
with hexagon key.
Tempered steel
No. 6358 Side stop DIN 6323 Loose type tenons
Tempered steel blued, with 2 threaded holes M16 for 2 positions. Set screw DIN 915 M16x80.
Steel C15, case hardened and ground.
No. 6322A Fixed type tenons No. 6322B Low type tenons
(previously DIN 6322 developed 1957)
C15 case-hardened.
Steel C15, case hardened and ground.