Home > MODULAR FIXTURE SYSTEMS > Positioning elements
Choose a sub category:
No. 6363-**-068 Support-stop block, single-sided No. 6363-**-060 Support-stop block, narrow
No. 6363-**-069 Support-stop block, double-sided No. 6363-**-027 Support-stop block
No. 6363-**-070 Support-stop block, single-sided, wide No. 6363-**-001 Support-stop block
No. 6363-**-026-* Support strip with slot No. 6363-**-012-2 Support-stop block
No. 6363-**-037-2 Support strip No. 6363-**-103-1 Support strip with pin
No. 6363-**-003-* Locating-support pin No. 6363-**-016 Cylindrical stop
No. 6363-**-071 Locating-support pin, round No. 6363-**-007 Support pin, flat
No. 6363-**-008 Support pin, domed No. 6363-**-072 Support pin, knurled
No. 6363-**-054 Support pin, round No. 6363-**-100 Support pin, knurled
No. 6363-**-080 Support pin, round No. 6363-**-009-* Support pin (spacer)
No. 6363-**-057-1 Support centering pin No. 6363-**-058-01 Centering pin, part-machined
No. 6363-**-058-** Centering pin, round No. 6363-**-059-** Centering pin, relieved square
No. 6363-00-104 Support element No. 6363-**-104 Fork clamp
No. 6363-00-104-* Support pin No. 6363-**-067 Stop element
No. 6363-**-010 Stop element No. 6363-**-029 Pressure element
No. 6363-**-040 V-block, 90° No. 6363-**-043-1 Angle block, 120°
No. 6363-**-049-1 Angle block, 120° No. 6363-**-048 Angle strip
No. 6363-**-098-1 Half-pitch element without positioning No. 6363-**-111-1 Half-pitch element with positioning
No. 6363-**-099-2 Half-pitch element without positioning No. 6363-**-112-2 Half-pitch element with positioning
No. 6363-**-046-* Spacer with positioning No. 6363-**-006-* Support washer
No. 6363-**-039 Spacer plate No. 6363-**-022-* Spacer plate with positioning
No. 6363-**-051-3 Spacer plate with positioning No. 6363-**-084-1 Spacer washer, laminated
No. 6363-**-005 Centering sleeve, cylindrical No. 6363-**-031-** Centering sleeve, slotted
No. 6363-**-004 Centering sleeve with flats No. 6363-**x**-01 Centering pin, reduced dia., with pilot dia.
No. 6363-60x50-01 Centering pin, increased dia., with pilot dia. No. 6363-20x**-01 Alignment pin, reduced
No. 6363-**xN**-01 Alignment pin for groove DIN 7979 Cylindrical dowel with female thread
No. 7979S Alignment pin, diamond section No. 6418 Support element, mechanical
No. 6419 Floating clamp No. 6380 Side thrust piece, without seal
No. 6380WZ Insertion tool No. 6380D Side thrust piece, with seal
No. 6387 Eccentric clamping bolt No. 6419B-12-01 Clamping jaw
No. 6419B-12-02 Clamping jaw No. 6419B-12-03 Clamping jaw
No. 6419B-12-04 Clamping jaw No. 6419B-12-05 Clamping jaw
No. 6419B-16-01 Clamping jaw No. 6419B-16-02 Clamping jaw
No. 6419B-16-03 Clamping jaw No. 6419B-16-04 Clamping jaw
No. 6363-**-068 Support-stop block, single-sided No. 6363-**-060 Support-stop block, narrow

Support-stop block, single-sided

Support-stop block, narrow

No. 6363-**-069 Support-stop block, double-sided No. 6363-**-027 Support-stop block

Support-stop block, double-sided

Support-stop block

No. 6363-**-070 Support-stop block, single-sided, wide No. 6363-**-001 Support-stop block

Support-stop block, single-sided, wide  

Support-stop block  

No. 6363-**-026-* Support strip with slot No. 6363-**-012-2 Support-stop block

Support strip with slot    

Support-stop block    

No. 6363-**-037-2 Support strip No. 6363-**-103-1 Support strip with pin

Support strip    

Support strip with pin    

No. 6363-**-003-* Locating-support pin No. 6363-**-016 Cylindrical stop

Locating-support pin    

Cylindrical stop    

No. 6363-**-071 Locating-support pin, round No. 6363-**-007 Support pin, flat

Locating-support pin, round    

Support pin, flat    

No. 6363-**-008 Support pin, domed No. 6363-**-072 Support pin, knurled

Support pin, domed      

Support pin, knurled      

No. 6363-**-054 Support pin, round No. 6363-**-100 Support pin, knurled

Support pin, round        

Support pin, knurled        

No. 6363-**-080 Support pin, round No. 6363-**-009-* Support pin (spacer)

Support pin, round        

Support pin (spacer)          

No. 6363-**-057-1 Support centering pin No. 6363-**-058-01 Centering pin, part-machined

Support centring pin    

Centering pin, part-machined    

No. 6363-**-058-** Centering pin, round No. 6363-**-059-** Centering pin, relieved square

Centering pin, round    

Centering pin, relieved square    

No. 6363-00-104 Support element No. 6363-**-104 Fork clamp

Support element    

Fork clamp      

No. 6363-00-104-* Support pin No. 6363-**-067 Stop element

Support pin      

Stop element    

No. 6363-**-010 Stop element No. 6363-**-029 Pressure element

Stop element    

Pressure element    

No. 6363-**-040 V-block, 90° No. 6363-**-043-1 Angle block, 120°

V-block, 90°    

Angle block, 120°    

No. 6363-**-049-1 Angle block, 120° No. 6363-**-048 Angle strip

Angle block, 120°

narrow support surface, double-sided

Angle strip
No. 6363-**-098-1 Half-pitch element without positioning No. 6363-**-111-1 Half-pitch element with positioning
Half-pitch element without positioning
Half-pitch element with positioning  
No. 6363-**-099-2 Half-pitch element without positioning No. 6363-**-112-2 Half-pitch element with positioning
Half-pitch element with positioning  
Half-pitch element with positioning  
No. 6363-**-046-* Spacer with positioning No. 6363-**-006-* Support washer
Spacer with positioning  
Support washer  
No. 6363-**-039 Spacer plate No. 6363-**-022-* Spacer plate with positioning
Spacer plate  
Spacer plate with positioning  
No. 6363-**-051-3 Spacer plate with positioning No. 6363-**-084-1 Spacer washer, laminated
Spacer plate with positioning  
Spacer washer, laminated  
No. 6363-**-005 Centering sleeve, cylindrical No. 6363-**-031-** Centering sleeve, slotted
Centering sleeve, cylindrical    
Centering sleeve, slotted    
No. 6363-**-004 Centering sleeve with flats No. 6363-**x**-01 Centering pin, reduced dia., with pilot dia.
Centering sleeve with flats    
Centering pin, reduced dia., with pilot dia.
No. 6363-60x50-01 Centering pin, increased dia., with pilot dia. No. 6363-20x**-01 Alignment pin, reduced
Centering pin, increased dia., with pilot dia.
Alignment pin, reduced
No. 6363-**xN**-01 Alignment pin for groove DIN 7979 Cylindrical dowel with female thread
Alignment pin for groove
Cylindrical dowel with female thread
No. 7979S Alignment pin, diamond section No. 6418 Support element, mechanical
Alignment pin, diamond section
incl. DIN 508-M12x14 nut for T-grooves, M12x30-10.9 threaded stud. Body: Case-hardened steel, manganese phosphatised and ground. Body: Aluminum.
No. 6419 Floating clamp No. 6380 Side thrust piece, without seal
incl mounting for T-grooves
Side thrust piece, without seal
No. 6380WZ Insertion tool No. 6380D Side thrust piece, with seal
Insertion tool
Side thrust piece, with seal
No. 6387 Eccentric clamping bolt No. 6419B-12-01 Clamping jaw
Eccentric clamping bolt
Case-hardened steel, nitrated and burnished.
Lower standard clamping jaw

No. 6419B-12-02 Clamping jaw No. 6419B-12-03 Clamping jaw
Case-hardened steel, nitrated and burnished.
Upper standard clamping jaw

Case-hardened steel, nitrated and burnished.
Upper exchangeable clamping jaw


No. 6419B-12-04 Clamping jaw No. 6419B-12-05 Clamping jaw
Case-hardened steel, nitrated and burnished.
Upper exchangeable clamping jaw


Case-hardened steel, nitrated and burnished.
Upper exchangeable clamping jaw


No. 6419B-16-01 Clamping jaw No. 6419B-16-02 Clamping jaw
Case-hardened steel, nitrated and burnished.
Upper standard clamping jaw


Case-hardened steel, nitrated and burnished.
Upper exchangeable clamping jaw



No. 6419B-16-03 Clamping jaw No. 6419B-16-04 Clamping jaw
Case-hardened steel, nitrated and manganese phosphatised.
Upper exchangeable clamping jaw




Case-hardened steel, nitrated and manganese phosphatised.
Upper exchangeable clamping jaw