>>




Home > STANDARD CLAMPING ELEMENTS > Clamping bolts, nuts and washers > No. 797 Rhombus-head screw for T-slots
Order
no. 		D x Slot x L A B E K Weight
[g]
87296 M12x14x 50 13.7 35 22 8 70
87312 M12x14x 80 13.7 55 22 8 100
87338 M12x14x125 13.7 75 22 8 120
87353 M16x18x 63 17.7 45 28 10 160
87379 M16x18x100 17.7 65 28 10 220
87395 M16x18x160 17.7 100 28 10 280
86793 M20x22x 80 21.7 55 35 14 330
86801 M20x22x125 21.7 85 35 14 430
86819 M20x22x200 21.7 120 35 14 570
86827 M24x28x100 27.7 70 44 18 650
86959 M24x28x125 27.7 85 44 18 770
87114 M24x28x250 27.7 150 44 18 1120

AMF No. 797 Rhombus-head screws for T-slots are forged. The T-slot guide-faces are broached and rolled. The thread is tempered to strength class 12.9. The strength class is punched into head.


Matching nuts DIN 6330B and washers DIN 6340.

Application:
Additional clamping point with fixture already clamped. Also possible to set-up a clamping point retrospectively, despite machine T-groove already being occupied. Rhombus screw no. can be inserted into the T-groove from above. This is also possible with the combination between rhombus groove no. 510 and stud bolt DIN 6379.