Home > TOGGLE CLAMPS > Push-Pull type toggle clamps > No. 6841 Push-pull type toggle clamp, red handle


Push-pull type toggle clamp with red handle

with small angle base.
For push- and pull- clamping. (Equal operation of rod and lever). Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearings are pre-lubricated. Lever can be set to any angle relative to base.
Ergonomic, oil-resistant handle with large grip surface and soft components.
Complete with tempered, galvanized clamping screw no. 6880.


Order
no.
Size F1
[kN]
F2
[kN]
Clamping screw Weight
[g]
94094 0 0.8 0.8 M 4x20 65
94110 1 1.0 1.0 M 4x20 125
94128 2 2.0 2.0 M 6x25 245
94136 3 2.5 2.5 M 8x35 445
94151 5 4.5 4.5 M12x50 880
94367 5-M27 4.5 4.5 M12x50 900

Also available in "STAINLESS STEEL" version (no. 6841NI) and in matte-black version (no. 6841B)!

Dimensions:
Order
no.
Size A B min. B max. D E H H1 Stroke HW min. HW max. K L1 L2 L3 M M2 N P
94094 0 6.5 17.0 33.0 4.5 13 12 49.3 16 12 20 6.5 66.5 10 54.0 16.0 M10x1.0 25 16
94110 1 8.0 24.5 44.5 4.5 20 15 60.5 20 12 20 7.0 91.0 16 74.0 16.0-19.5 M12x1.5 30 20
94128 2 10.0 32.5 58.5 5.6 20 20 85.5 26 17 25 12.5 114.0 19 105.0 31.8-36.0 M16x1.5 50 34
94136 3 12.0 37.0 69.0 6.5 30 25 108.0 32 22 35 13.0 140.0 22 127.5 29.5-42.5 M20x1.5 60 30
94151 5 16.0 41.5 81.5 8.5 50 30 129.5 40 30 50 15.5 171.5 25 158.0 29.0-46.0 M24x1.5 65 35
94367 5-M27 16.0 41.5 81.5 8.5 50 30 129.5 40 30 50 15.5 171.5 25 158.0 29.0-46.0 M27x2.0 65 35