Home > TOGGLE CLAMPS > Push-Pull type toggle clamps > No. 6840Y Push-pull type toggle clamp, yellow handle


Push-pull type toggle clamp with yellow handle

without angle base.
For push- and pull- clamping. (Equal operation of rod and lever). Long rod-guide with attaching thread and nut. Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and rod of tempered steel. Bearings are pre-lubricated. Push-pull toggle clamp with threaded front for direct mounting in vertical metal plates or fixtures.
Ergonomic, oil-resistant handle with large grip surface and soft components.
Complete with tempered, galvanized clamping screw no. 6880.


Order
no.
Size F1
[kN]
F2
[kN]
Clamping screw Weight
[g]
557161 0 0.8 0.8 M 4x20 60
557162 1 1.0 1.0 M 4x20 100
557163 2 2.0 2.0 M 6x25 245
557164 3 2.5 2.5 M 8x35 330
557165 5 4.5 4.5 M12x50 700
557166 5-M27 4.5 4.5 M12x50 720

Dimensions:
Order
no.
Size A B min. B max. E H1 Stroke HW min. HW max. L1 L2 L3 M2 N
557161 0 6.5 10.5 26.5 13 37.0 16 12 20 66.5 10 54 M10x1.0 15.0
557162 1 8.0 17.5 37.5 20 45.5 20 12 20 91.0 16 74 M12x1.5 18.0
557163 2 10.0 20.0 46.0 20 66.0 26 17 25 114.0 19 105 M16x1.5 22.0
557164 3 12.0 24.0 56.0 30 82.5 32 22 35 140.0 22 127 M20x1.5 27.0
557165 5 16.0 26.5 66.5 50 99.0 40 30 50 171.5 25 158 M24x1.5 34.5
557166 5-M27 16.0 26.5 66.5 50 99.0 40 30 50 171.5 25 158 M27x2.0 34.5