Home > TOGGLE CLAMPS > Horizontal toggle clamps > No. 6830G Horizontal acting toggle clamp, green handle


Horizontal toggle clamp with green handle

with open clamping arm and horizontal base.
Galvanized and passivated. Rivets made of stainless steel, which, for sizes 2-5, run in hardened bushings. Bearings are pre-lubricated. Ergonomic, oil-resistant handle with large grip surface and soft components. Lock washer for the thrust bolt at the end of the clamping arm.
Complete with tempered, galvanized clamping screw no. 6890.

Order
no.
Size F1
[kN]
F2
[kN]
Clamping screw Weight
[g]
557492 0 0.25 0.4 M4x25 35
557493 1 0.8 1.1 M5x30 105
557494 2 1.0 1.2 M6x35 185
557495 3 1.8 2.5 M8x45 320
557496 4 2.0 3.0 M8x65 700
557497 5 3.0 5.0 M8x65 1080

Also available in "STAINLESS STEEL" version (no. 6830NI) and in matte-black version (no. 6830B)!

Note:
For suitable sensor monitor for size 3 see no. 6897S.

Dimensions:
Order
no.
Size A B C D D1 E F H H1 H2 HW min. HW max. I K L L1 M M1 N P α
557492 0 4 28 11.5-15.5 4.6 - 9.0 5.5 14.5 23.0 34 -5.5 0.0 7.5 6.3 - 79 16.0 - 25.0 25.5 90°
557493 1 5 42 13.0-14.5 5.2 - 18.7 8.0 19.0 30.0 49 -3.0 2.5 10.0 5.5 - 120 18.0-21.5 - 34.0 34.0 90°
557494 2 6 64 26.0 5.6 5.6 32.0 16.0 24.0 45.0 68 -1.5 5.0 13.2 6.0 12.7 162 19.5-29.5 28.5 42.0 38.0 90°
557495 3 8 73 25.7 6.5 5.1 38.0 14.0 32.0 48.5 86 -2.0 9.0 15.0 7.0 13.0 206 22.0-31.8 31.6 45.5 50.0 90°
557496 4 10 113 41.0 8.5 8.5 63.0 27.0 45.0 75.0 126 -4.0 24.0 20.0 8.020.5 287 29.0-43.0 43.0 58.0 57.0 90°
557497 5 10 123 41.5 8.5 - 78.0 16.0 46.0 73.0 128 +1.7 25.0 25.0 12.5 - 321 41.5 - 58.0 77.0 90°