Home > TOGGLE CLAMPS > Vertical toggle clamps > No. 6812P Heavy vertical toggle clamp


Heavy vertical toggle clamp

with vertical base and mounting holes.
Reamed and case-hardened bearing bushes. Hardened, ground and permanently-lubricated pins. Clamp nuts on lever arm to vary friction in movement. Material: steel, blued. Lever arm made of cast steel, blued. Handle of red, oil-resistant plastic.
Complete with tempered, galvanized clamping screw no. 6885.

Order
no.
Size F1
[kN]
Clamping screw Weight
[g]
91330 2 2.5 M 6x 50 320
90902 4 10.0 M12x 80 1320
90910 6 12.0 M12x110 2120
90928 8 20.0 M12x110 4060

Note:
These heavy vertical toggle clamps are especially suitable for production equipment and fixtures.

Dimensions:
Order
no.
Size A B C D D1 E F H H1 H2 H3 HW min. HW max. I K L1 L2 N O P α
91330 2 6.2 48 - - - 30 12 42.0 144 - - 3.5 22.8 15 - 85 94 31 6 37 190°
90902 4 12.2 101 30 8.5 5.7 - 75 62.0 233 10 25 -1.0 35.0 24 15 146 161 52 10 60 120°
90910 6 12.2 121 45 10.5 7.7 - 95 87.5 289 15 35 0.0 58.0 30 15 181 189 60 12 75 120°
90928 8 12.2 151 55 12.5 9.7 - 120 106.0 338 15 40 25.0 76.0 36 20 226 219 76 16 95 120°