>>




Home > STANDARD CLAMPING ELEMENTS > Pull-down clamps > No. 6496 Flat clamp
Order
no. 		Size Slot G F1
[kN] 		F2
[kN] 		H min. H max. Weight
[g]
374157 M12x14 14 M12 15 7.5 16 25 579
374165 M12x16 16 M12 15 7.5 16 25 600
374173 M16x18 18 M16 20 10.0 19 30 1011
374181 M16x20 20 M16 20 10.0 19 30 1055
374199 M20x22 22 M20 30 15.0 22 36 1670
374207 M20x24 24 M20 30 15.0 22 36 1705
374215 M20x28 28 M20 30 15.0 22 36 1807

Application:
1. Slide flat clamp into T-groove of the machine table.
2. Position on workpiece.
3. Secure fastening bolts for machine table.
4. Actuating the clamping bolt clamps the workpiece.

Note:
To reduce wear to the fastening bolts, we recommend using AMF screw compound No. 6339. It possesses a synergistic combination of highly-effective solid lubricants and is heat-resistant and does not wash out.

Advantage:
- For clamping of very thin workpieces
- Lateral clamping of workpieces to completely finish surfaces without interference contours
- Can be used for horizontal and vertical applications.

Dimensions::

Order
no. 		Size B H1 L L1 L2
374157 M12x14 44 16 110 45-48 26
374165 M12x16 44 16 110 45-48 26
374173 M16x18 56 19 130 50-54 33
374181 M16x20 56 19 130 50-54 33
374199 M20x22 62 22 152 58-63 41
374207 M20x24 62 22 152 58-63 41
374215 M20x28 62 22 152 58-63 41