Home > STANDARD CLAMPING ELEMENTS > Pull-down clamps > No. 6492 Flat clamp, model "Mini-Bulle"
Order
no.
Slot H min. H max. B C H1 L X F1
[kN]
F2
[kN]
Weight
[g]
73098 12 2,5 13,5 18 1,8 11 52 5 5,0 0,6 300
73106 14 1,5 13,5 22 1,8 11 55 5 5,5 0,7 380
73114 16 2,5 17,0 25 2,5 15 68 6 8,0 0,9 700
73122 18 1,5 16,0 28 2,5 15 71 6 9,0 1,0 830
73080 22 4,5 21,5 35 3,0 20 89 9 16 1,9 1740

Hmin./Hmax.: depending on groove depth to DIN 650. The clamping piece can be ground by X mm. This allows lower clamping heights to be achieved.

Application:
These tempered clamps are designed for extremely low workpieces. Wedge action of jaws presses the workpiece firmly and safely against the machine table. The horizontal forces are compensated by a screw related to slot size, which blocks the clamp without damage to table.