 |
Order
no.
|
Clamping force
vertical
[kN]
|
torque Md
[Nm]
|
dia. K
[mm]
|
Lateral compensation per clamp
[mm]
|
Clamping rim height
min. for Al-alloy
[mm]
|
Weight
[g]
|
|
375600
|
5
|
18
|
10.9-11.8
|
±0.25
|
9
|
2150
|
|
375667
|
5
|
18
|
11.9-12.8
|
±0.25
|
9
|
2150
|
|
375683
|
5
|
18
|
12.9-13.8
|
±0.25
|
9
|
2150
|
|
375709
|
5
|
18
|
13.9-14.8
|
±0.25
|
10
|
2250
|
|
375725
|
5
|
18
|
14.9-15.8
|
±0.25
|
10
|
2250
|
|
375741
|
5
|
18
|
15.9-16.8
|
±0.25
|
10
|
2250
|
Application:
- Used for workpieces with existing or retrofitted holes.
- Once the clamping segments are engaged in the holes, reliable 5-sided finishing is possible without a problem.
- A simple hexagon socket spanner (SW 10) is used to actuate the element.
- The existing clamping rim fastens the pull-down clamping element on the machine table.
- For positioning on a fixture, the underside has two positioning holes (pin ISO 8734 - 8 mm).
Note:
- Please check with us for clamping of hardened workpieces or workpieces made of GG / GGG.
- The radial force must be observed!
- The lateral force when positioning the workpiece must not exceed the "lateral force" specified in the table. - The clamping jaws for the machine vices can be used for clamping on the machine table (No. 6325; Order no.: 74682, 373878).
Advantage:
- All parts are made of tempered steel. All components are plasma-nitrided and are hence very resistant to wear and corrosion.
- Two-part clamping segments are interlocked externally.
- Flexible in use thanks to ease of handling and clamping on the machine table.
On request:
Other sizes and special versions without pull-down and as support elements.
Dimensions:
Order
no.
|
Permissible
horizontal force
|
Radial force of
sleeve segments
|
Expansion
of sleeve
|
Clamping piston diameter
|
Side load
(unclamped)
|
C
|
D
|
D1
|
D2
|
|
375600
|
2.8
|
27
|
1.5
|
22
|
100
|
10.5
|
80
|
100
|
10.6
|
|
375667
|
2.8
|
27
|
1.5
|
22
|
110
|
10.5
|
80
|
100
|
11.6
|
|
375683
|
3.0
|
27
|
1.5
|
22
|
130
|
10.5
|
80
|
100
|
12.6
|
|
375709
|
3.0
|
27
|
1.5
|
22
|
160
|
10.5
|
80
|
100
|
13.6
|
|
375725
|
3.5
|
27
|
1.5
|
22
|
200
|
10.5
|
80
|
100
|
14.6
|
|
375741
|
3.5
|
27
|
1.5
|
22
|
250
|
10.5
|
80
|
100
|
15.6
|
|
|
|
STANDARD CLAMPING ELEMENTS
