 |
Order
no.
|
Size
|
Slot
|
H ±0,1
|
H1 min.
|
H1 max.
|
H2 min.
|
H2 max.
|
dia. D1
|
dia. D2
|
dia. D3
|
G1
|
G2
|
SW
|
Weight
[g]
|
|
74179
|
80
|
14
|
80
|
116
|
148
|
8
|
40
|
40
|
50
|
32
|
M12
|
M16
|
27
|
1270
|
Application:
- The mandrels are fastened to the machine table by means of T-nuts.
- The mandrel is fixed on the slotted table by operating the SW 27 mm pre-tensioned nut.
- Clamping is by means of the SW 27 mm screw of tempered steel.
- Damage to the workpiece is prevented by a brass clamping ring.
Note:
- Suitable for workpiece thicknesses from 8 to 40 mm
- Support height 80 mm - Also available is an extension screw for workpiece thicknesses from 40 - 72 mm and Spacer elements of 25 mm and 50 mm to increase the support height
Advantage:
- Reduced tooling time and tool elements cuts tooling costs
- Optimal use of the machine table
- Tension on flat workpieces increased to make holes, threads and grooves
|
|
|
STANDARD CLAMPING ELEMENTS
