Home > STANDARD CLAMPING ELEMENTS > Clamps > No. 6312V "Crocodile" clamp

"Crocodile" clamp

Continuously adjustable, tempered, galvanized, with nondetachable compression piece and back support.

Order
no.
B1 Slot Clamping force max.*
[kN]
H1 Weight
[g]
79756 13 10, 12, 14 30 0-55 661
79798 17 12, 14, 16, 18 40 0-70 1494
79855 21 16, 18, 20, 22 60 0-80 2252
79913 25 20, 22, 24, 28 75 0-100 3635
376475 25 20, 22, 24, 28 75 0-100 4335


* Specified clamping forces in optimal clamping position (smallest distance from the clamping screw to the clamping point). Clamping forces can vary depending clamping, strength class of the clamping screw and condition of the thread (lubrication).

Dimensions:
Order
no.
A A1 A2 B2 x L B3 E1 E2 H2 K
79756 27 17 12 44x115 30 25 30 18 11
79798 36 21 17 55x150 41 35 36 20 12
79855 42 27 20 62x187 30 44 44 30 14
79913 51 34 24 70x235 30 60 47 31 17
376475 56 35 24 73x285 30 62 51 35 17

Application:

The crocodile clamping claw is used for all clamping tasks using T-slots and threaded holes. Thrust piece and counter-bearing are connected permanently to the clamping jaw, and thus the crocodile is quickly ready to use. The clamping jaw features two ridges and can be turned around easily depending on the application. In this way, it is possible to cover all fields of application involving cutting and non-cutting processes (e.g. injection moulding and pressure forming).


Note:

Your choice of tensioning screws DIN 787, stud screws DIN 6379 and the cylinder screws ISO 4762 can be used for clamping. Greater clamping heights can be achieved through use of the support extension no. 6312S.


Advantage:

- Variable and fast adjustment option at a distance from the workpiece
- Use in all areas involving cutting and non-cutting processes
- Especially well-suited for use on injection moulding machines and presses
- No additional supports needed to achieve the required clamping height
- Thrust piece and counter-bearing are connected permanently to the clamping jaw
- The crocodile can be extended easily for every clamping height.