Home > STANDARD CLAMPING ELEMENTS > Clamps > No. 6310 Clamps with plastic cap, complete

Clamp with plastic cap, complete

with DIN 787, DIN 6340, DIN 6330B and undetachable U-piece, burnished tempered steel

Order no. B1 Slot Clamping bolt
DIN 787
for
clamping screw
metric
for
clamping screw
inch
Weight
[g]
376555 11 10 M10x10x80 M10 3/8 349
376871 14 12 M12x12x100 M12 M14 1/2 886
376897 14 14 M12x14x125 M16 M18 5/8 905
376913 18 16 M16x16x160 M20 M22 3/4 1648
376939 18 18 M16x18x160 M22 M24 3/4 1 1668


Dimensions:

Order no.
L
H1
A
A1
B2
E1
E2
376555 80 0-15 30.5 32.0 44 30 19
376871 125 0-33 47.0 49.5 57 37 51
376897 125 0-45 58.5 62.0 67 49 63
376913 160 0-65 71.5 75.0 72 58 83
376939 160 0-85 89.5 94.0 82 74 102

Application:

The clamp is used for all clamping tasks in which clamping is effected via T-grooves, grooves and threaded bores.

Note:

For clamping, either clamping screws DIN 787, stud bolts DIN 6379 and cheese head screws ISO 4762 can be used.
A washer disc DIN 6340 must always be used between the hexagonal nut and compression piece!

Advantage:

Weight-saving thanks to lightweight design. Variable and fast adjustment option at a distance from the workpiece. No additional clamping supports are needed to reach the required clamping height. The shim cannot be detached from the clamp.