Home > STANDARD CLAMPING ELEMENTS > Clamping bolts, nuts and washers
Choose a sub category:
DIN 787 Bolts for T-slots DIN 787 Bolts for T-slots complete with nut and washer
DIN 787 Bolts for T-slots (12.9) No. 797 Rhombus-head screw for T-slots
DIN 6379 Studs DIN 6379 Studs (12.9)
DIN 6379I Threaded pins (12.9) with hexagon socket DIN 508 Nuts for T-slots (T-nuts)
DIN 508F T-nuts with spring (pat. pend.) DIN 508L Nuts for T-slots, extended
No 510 Nuts for T-slots "Rhombus" No 508R Blanks for T-nuts
DIN 6330B Hexagon nut No 6334 Extension nut
No 6331 Collar nut No 6331 Collar nut, forged
No 6332S Quick-action clamping nut without collar No 6333S AMF-TWINNUT nut - without collar
No 6333SB AMF-TWINNUT nut - with collar No 6333 Mounting key
DIN 6340 Washer No 6319C Spherical seat washer
No 6319D Dished washer No 6319D Dished washer, C45
No 6319G Dished washer
DIN 787 Bolts for T-slots DIN 787 Bolts for T-slots complete with nut and washer
AMF DIN 787 Bolts for T-slots are Forged and feature T-slot guide-faces milled, rolled thread, AMF-symbol and strength class punched into head. Size M6-M12 bolts are tempered to strength class 10.9, size M14-M42 are tempered to strength class 8.8.
AMF DIN 787 bolts for T-slots come complete with hexagon nut DIN 6330B and washer DIN 6340.
Forged, milled T-groove, rolled thread, stamped with AMF logo and strength class. Sizes M6 to M12 are hardened to strength class 10.9, while sizes M14 to M42 are hardened to strength class 8.8.
DIN 787 Bolts for T-slots (12.9) No. 797 Rhombus-head screw for T-slots
AMF DIN 787 Bolts for T-slots are forged and feature T-slot guide-faces broached and rolled. Threads are tempered to strength class 12.9. Strength class punched into head.
AMF No. 797 Rhombus-head screws for T-slots are forged. The T-slot guide-faces are broached and rolled. The thread is tempered to strength class 12.9. The strength class is punched into head.
DIN 6379 Studs DIN 6379 Studs (12.9)
AMF DIN 6379 Studs feature a rolled thread. Sizes M6-M12 are tempered to strength class 10.9, sizes M14-M42 are tempered to strength class 8.8.
The specially developed AMF-studs for clamping purposes are graduated by length according to DIN 323 series R10 figures.
AMF DIN 6379 Studs feature a rolled thread. They are tempered to strength class 12.9.
The stud bolts developed by AMF especially for clamping purposes have lengths adapted to the standard dimensions.
DIN 6379I Threaded pins (12.9) with hexagon socket DIN 508 Nuts for T-slots (T-nuts)
AMF DIN 6379I Threaded pins (12.9) with hexagon socket feature a rolled thread. The bolts are tempered to strength class 12.9.
The stud bolts developed by AMF especially for clamping purposes have lengths adapted to the standard dimensions.
AMF DIN 508 Nuts for T-slots,or T-nuts, are tempered to strength class 10. The nuts for the T-groove can only experience a full load when the screw connection exists over the entire length of the thread.
DIN 508F T-nuts with spring (pat. pend.) DIN 508L Nuts for T-slots, extended
AMF DIN 508F T-nuts with spring (pat. pend.) feature a (T groove key), with spring. The T-nut is hardened to strength class 10. The spring is Stainless steel.
AMF DIN 508L Nuts for T-slots, or T-nuts, are extended. The T-nut is hardened to strength class 10.
No 510 Nuts for T-slots "Rhombus" No 508R Blanks for T-nuts
AMF No 510 Nuts for T-slots "Rhombus" are tempered. For the tensile strength classes see adjoining table. Lower load capacities compared with comĀ­parable sizes of DIN 508 due to reduced bearing surface in the T-slots.
AMF No 508R Blanks for T-nuts are made of tempered steel 0.35-0.45 % C.
DIN 6330B Hexagon nut No 6334 Extension nut
height 1,5 dia. Tempered, tensile strength class 10. With spherical end matching taper face of washers DIN 6319 D or G. Flat end matching hardened washers DIN 6340
height 3.0 dia. Tempered, tensile strength class 10
No 6331 Collar nut No 6331 Collar nut, forged
Height 1,5 dia. Turned and milled. Tempered, tensile strength class 10
Height 1,5 dia. Forged. Tempered, tensile strength class 10
No 6332S Quick-action clamping nut without collar No 6333S AMF-TWINNUT nut - without collar
hardened and zinc-plated, strength class 6
with separation block.
No 6333SB AMF-TWINNUT nut - with collar No 6333 Mounting key
with separation block.
Mounting key

DIN 6340 Washer No 6319C Spherical seat washer
tempered (350 + 80 HV30)
Case hardened and phosphated.
No 6319D Dished washer No 6319D Dished washer, C45
Case hardened and phosphated. Designed for screw solidity in compliance with 8.8. Limited for use on flat closed ring areas (not allowed for elongated holes, we recommend DIN 6319G for these).
made of C45. Designed for screw solidity in compliance with 12.9. Limited for use on flat closed ring areas (not allowed for elongated holes, we recommend DIN 6319G for these).
No 6319G Dished washer
punched, gauged and tempered. Due to large dia. and thickness more suitable to match slotted clamps.