Home > STANDARD CLAMPING ELEMENTS > Chain Clamping Systems
Choose a sub category:
No. 6540 Chain clamping set No. 6540G Counter catch
No. 6540H Hook end, mechanical No. 6540K Roller chain
No. 6540S Clamp chain protection set No. 6540V Connecting links with spring cotter pin
No. 6540VS Turnbuckle No. 6540F Spring cotter pin
No. 6540S Protective elements No. 6540P Angle block, 120°
No. 6541 Fixtures for T-nuts No. 902Md Open-ended spanner with torque-wrench fitting
No. 6540 Chain clamping set No. 6540G Counter catch
Tensioning hook and take-up unit are hardened and tempered.Chain is made of alloy steel. Please order mounting for T-slots (No. 6541) separately.
Consisting of:
- Tensioning hook end
- Clamp chain protection set
- Counter catch
- 4 different lengths of chain
- 4 locking links with split pins for connecting
- 6 plastic clip elements (for workpiece protection)
Total length M12 = 1,108 mm
Total length M16 = 1,145 mm
for chain clamping set
No. 6540H Hook end, mechanical No. 6540K Roller chain
for chain clamping set
Single roller chain DIN 8187. ISO R 606 B, ST 37-2. Surface: plain.
No. 6540S Clamp chain protection set No. 6540V Connecting links with spring cotter pin
Completely assembled.


No. 6540VS Turnbuckle No. 6540F Spring cotter pin


Packaging unit: 10 pcs.
No. 6540S Protective elements No. 6540P Angle block, 120°
for workpiece protection.
Packaging unit: 6 pcs.

No. 6541 Fixtures for T-nuts No. 902Md Open-ended spanner with torque-wrench fitting
For attaching the chain clamping set no. 6540 on the sub-plate, composed of nut for T-nut, resembling DIN 508, and screw complying with ISO 4762, class 8.8
for clamping nuts. Drive 1/2" square socket with ball-engagement groove. Special steel, hardened and zinc-plated.