Home > MODULAR FIXTURE SYSTEMS > Basic Elements
Choose a sub category:
No. 6361B Clamping pallet No. 6361D-M12 Clamping pallet
No. 6361D-M16 Clamping pallet No. 6362B Clamping angle, basic model
No. 6362D-M12 Clamping angle No. 6362D-M16 Clamping angle
No. 6367D-M12 Clamping angle, single sided No. 6367D-M16 Clamping angle, single sided
No. 6366A Clamping angle, basic model, double sided No. 6366D-M12 Clamping angle, double sided
No. 6366D-M16 Clamping angle, double sided No. 6364A Clamping column, basic model
No. 6364D-M12 Clamping column No. 6364D-M16 Clamping column
No. 6361B Clamping pallet No. 6361D-M12 Clamping pallet
Parallelism: 0.01/100 mm
Clamping surface faces: smoothed
Hardness: unhardened
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Contour: cut using an oxyacetylene flame/saw
Clamping thread (M): M12
Grid pitch (R): 40 mm ± 0.01 mm
Grid hole (D): Ø 16F7
Grid hole (E): 12
Parallelism: 0.01/200 mm (in mounted state)
Clamping surface faces: smoothed after nitration
Hardness: 700-100 HV1 plasma nitrated
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179
Contour: cut using an oxyacetylene flame/saw
No. 6361D-M16 Clamping pallet No. 6362B Clamping angle, basic model
Clamping thread (M): M16
Grid pitch (R): 50 mm ± 0.01 mm
Grid hole (D): Ø 22F7
Grid hole (E): 13
Parallelism: 0.01/200 mm (in mounted state)
Clamping surface faces: smoothed after nitration
Hardness: 700-100 HV1 plasma nitrated
Material: case-hardened steel
Alignment hole and centre hole: with hardened bushes in accordance with DIN 179
Contour: cut using an oxyacetylene flame/sawn
Perpendicularity: 0.01/200 mm
Material: aluminum casting
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with clamping and base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Mounting hole and alignment hole in clamping surfaces: for pallets No. 6361B and No. 6361D
No. 6362D-M12 Clamping angle No. 6362D-M16 Clamping angle
Clamping thread (M): M12
Grid pitch (R): 40 mm ± 0.01 mm
Grid hole (D): Ø 16F7
Grid hole (E): 12 mm
Perpendicularity: 0.01/100 mm
Clamping surface faces: smoothed after nitration
Hardness (clamping pallet ): 700-100 HV1 plasma nitrated
Material: basic unit : aluminum casting
Pallet: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with clamping and base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Contour (clamping pallets): cut using an oxyacetylene flame/saw Mounted clamping pallet : according to table
Clamping thread (M): M16
Grid pitch (R): 50 mm ± 0.01 mm
Grid hole (D): Ø 22F7
Grid hole (E): 13 mm
Perpendicularity: 0.01/100 mm
Clamping surface faces: smoothed after nitration
Hardness (clamping pallet ): 700-100 HV1 plasma nitrated
Material: basic unit : aluminum casting
Pallet: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with clamping and base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Contour (clamping pallets): cut using an oxyacetylene flame/saw Mounted clamping pallet : according to table
No. 6367D-M12 Clamping angle, single sided No. 6367D-M16 Clamping angle, single sided
Clamping thread (M): M12
Grid pitch (R): 40 mm ± 0.01 mm
Grid hole (D): Ø 16F7
Grid hole (E): 12 mm
Perpendicularity: 0.01/200 mm
Clamping surface face: smoothed after nitration
Hardness: 700-100 HV1
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Clamping thread (M): M16
Grid pitch (R): 50 mm ± 0.01 mm
Grid hole (D): Ø 22F7
Grid hole (E): 13 mm
Perpendicularity: 0.01/200 mm
Clamping surface face: smoothed after nitration
Hardness : 700-100 HV1
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
No. 6366A Clamping angle, basic model, double sided No. 6366D-M12 Clamping angle, double sided
Parallelism: 0.01/200 mm
Clamping surface faces: finely milled or smoothed
Hardness: unhardened
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179
with base surface
Base surface : with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Contour: cut using an oxyacetylene flame/saw
Clamping thread (M): M12
Grid pitch (R): 40 mm ± 0.01 mm
Grid hole (D): Ø 16F7
Grid hole (E): 12 mm
Perpendicularity: 0.01/200 mm
Clamping surface faces: smoothed after nitration
Hardness: 700-100 HV1 plasma nitrated
Material: case-hardened steel

Pallet: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
No. 6366D-M16 Clamping angle, double sided No. 6364A Clamping column, basic model
Clamping thread (M): M16
Grid pitch (R): 50 mm ± 0.01 mm
Grid hole (D): Ø 22F7
Grid hole (E): 13 mm
Perpendicularity: 0.01/200 mm
Clamping surface faces: smoothed after nitration
Hardness: 700-100 HV1 plasma nitrated
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Parallelism: 0.01/200 mm
Clamping surface faces: smoothed
Hardness: unhardened
Material: case-hardened steel
Alignment hole and center hole:
with hardened bushes in accordance with DIN 179
with base surface
Base surface : with hole pattern according to drawing
suitable for machine table in accordance with DIN 5520.
No. 6364D-M12 Clamping column No. 6364D-M16 Clamping column
Clamping thread (M): M12
Grid pitch (R): 40 mm ± 0.01 mm
Grid hole (D): Ø 16F7
Grid hole (E): 12 mm
Perpendicularity (R):  0.01/200 mm
Clamping surface faces: smoothed after nitration
Hardness: 700-100 HV1
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201
Clamping thread (M): M16
Grid pitch (R): 50 mm ± 0.01 mm
Grid hole (D): Ø 22F7
Grid hole (E): 13 mm
Perpendicularity (R):  0.01/200 mm
Clamping surface faces: smoothed after nitration
Hardness: 700-100 HV1
Material: case-hardened steel
Alignment hole and center hole: with hardened bushes in accordance with DIN 179 with base surface
Base surface: with hole pattern according to table or drawing, suitable for machine table in accordance with DIN 55201